May 27, 2020
With the continuous heating of home decoration, the changes of ceiling lamps are changing with each passing day. They are no longer limited to the single lamps in the past, but are diversified. They not only absorb the luxury and style of the chandelier, but also adopt the ceiling-mounted installation method. It avoids the defect that the large rooms can not be equipped with large luxury lighting. The body of the LED ceiling light is directly installed on the roof, suitable for overall lighting, and is usually used in the living room and bedroom. The following points should be noted in the installation and use of LED ceiling lights:
1. When installing the ceiling lamp in the masonry structure, the embedded bolts should be used, or fixed with expansion bolts, nylon plugs or plastic plugs, and wooden wedges are not allowed. And the carrying capacity of the above fixing parts should match the weight of the ceiling lamp to ensure that the ceiling lamp is firmly and reliably fixed, and can extend its service life.
2. When fixing with expansion bolts, the bolt specifications should be selected according to the technical requirements of the product, and the drilling diameter and embedding depth should be consistent with the bolt specifications.
3. The number of bolts for fixing the lamp holder should not be less than the number of fixing holes on the base of the lamp, and the diameter of the bolt should match the hole diameter; lamps without fixed mounting holes on the base (perforate themselves during installation), each lamp is used for fixing The number of bolts or screws should not be less than two, and the center of gravity of the lamp should be consistent with the center of gravity of the bolts or screws; only when the diameter of the insulating table is 75mm or less, one bolt or screw can be used for fixing.
4. The LED ceiling lamp cannot be directly installed on combustible objects. Some families use painted three-plywood behind the ceiling lamp for beautiful appearance. In fact, this is very dangerous, and heat insulation measures must be taken; if the high temperature part of the lamp surface is close to When combustibles are used, heat insulation or heat dissipation measures should also be taken.
5. The LED ceiling lamp should also be checked before installation:
① The cross section of the wire core leading to each lamp, the copper core flexible wire is not less than 0.4mm2, the copper core is not less than 0.5mm2, otherwise the lead wire must be replaced.
② The connection between the wire and the lamp cap and the connection of the parallel wire between the lamp caps should be firm, and the electrical contact should be good, so as to avoid the danger of sparks between the wire and the terminal due to poor contact.
6. Educate children not to throw balloons or other objects at the lamp in the room, so as to avoid the falling ornaments hanging on the lamp to hurt people or affect the decorative effect of the lamp.
Building G, 13, Lefeng 2nd Road, Maohui Industrial Zone, Henglan Town, Zhongshan City, Guangdong Province, China.